Skip to content

Manual to change the spring of an air rifle

Download Manual to change the spring of an air rifle
Hello! If you want to learn how to change the springs of piston carbines, You are in the right place. In this post, I am going to guide you through the process step by step with this manual, so you can do it yourself and enjoy optimal performance of your rifle. Let's go there!

Piston carbines
Piston carbine
Table of Contents

Step by step: Change the spring of your air rifle

When dealing with air rifles, it is important to keep the equipment in good condition for optimal performance. Changing the spring is a simple task that you can do at home by following these steps:

Necessary materials

Before you begin, make sure you have all the necessary materials on hand. You will need:

  • air rifle
  • Compatible replacement spring
  • Screwdriver
  • Allen wrench
  • Lubricant for compressed air weapons
  • Clean and safe work surface

De-constructability

Disassembly of an air rifle
Disassembly of an air rifle
  1. Place your air rifle on a flat, stable surface.
  2. Identify the set screws that secure the stock to the rifle mechanism.
  3. Using the screwdriver or Allen wrench, loosen and remove the screws.
  4. Once the screws are out, carefully separate the stock from the mechanism. This will give you access to the dock.

Removing the old spring

Removing the old spring
Removing the old spring from an air rifle
  1. Note how the spring is positioned in the mechanism before removing it. This will help you correctly position the new spring.
  2. Carefully remove the old spring from its original location. If necessary, you can use pliers, but make sure not to damage the rifle or its components.

Installing the new spring

  1. Take the compatible replacement spring and make sure it is the right one for your air rifle. Check the specifications and dimensions to avoid operating problems.
  2. Place the new spring in the same position and orientation as the old spring. Make sure it is properly seated in place.

Mounting

Air rifle assembly
Air rifle assembly
  1. Reattach the stock to the rifle mechanism, making sure to properly align the mounting screw holes.
  2. Use the screwdriver or Allen wrench to insert and tighten the set screws. Make sure they are snug, but avoid overtightening.

Lubrication and testing

  1. It is important to lubricate your air rifle for smooth and long-lasting operation. Use a specific lubricant for airguns and apply a small amount to the friction and contact points of the mechanism.
  2. Once lubricated, perform a functional test by firing the carbine in a safe place and with caution. This will allow you to ensure that the new spring is installed correctly and that the rifle operates smoothly.

Remember, if you have any questions or do not feel confident performing this process yourself, it is advisable to seek the assistance of a gunsmith or airgun expert. It's always best to be safe and get professional help if necessary!

Now that you have the necessary steps to change the spring on your air rifle, you can enjoy optimal performance and continue enjoying your passion for sports shooting. Have fun and keep your rifle in good condition!

If you want more information about the maintenance of piston rifles, here you can download our exclusive Maintenance Manual for Spring Air Rifles.

If you are passionate about shooting sports and want to maximize the performance of your rifle, this manual is for you.

 

MAINTENANCE MANUAL FOR SPRING AIR RIFLES