CHEVROLET Pick Up 2006 Workshop Manual Download Free PDF

Download Manual Pick Up 2006 Chevrolet Repair and Service

Download the 2006 Chevrolet Pick Up Manual Repair and Service which covers all the mechanical and electrical aspects of the different versions of the Pick Up.

The Manual includes Procedures repair, assembly and disassembly with step-by-step illustrations, are manuals that are available in official service centers.

Remember that it is important to properly maintain your vehicle; carelessness or forgetfulness in maintenance tasks brings greater costs and inconveniences.

Only 3 out of 10 owners carry out proper maintenance on their vehicle, this is established by statistics worldwide.

Don't join those carefree people and make a difference and download the 2006 Chevrolet Pick Up Manual Repair and Service.

Below we inform you in general terms of all the topics that you can consult with these manuals so that you have an idea of the contents.

Table of Contents

2006 Pick Up Engine Repair

Repairing an engine, whether gasoline or diesel, is not an easy task. Therefore, it is something that will have to be done always by a professional specialized in the matter who has more than enough knowledge to carry out the engine repair.

2006 Chevrolet Pick Up Manual Engine Repair

In this Pick Up Manual 2006 Chevrolet repair You will see some useful recommendations to repair the 2006 Pick Up engine, the usual tools that are usually needed in this type of task, the tests to be carried out in advance and everything related to the preparation to carry out an action of this magnitude.

However, it is also important to mention that Periodic and preventive maintenance of the engine is the best way to extend its useful life. and prevent it from having to be repaired.

With these manuals for Pick Up 2006 You will be able to carry out the general composure since it includes well-detailed images and diagrams of the disassembly as well as the tightening torques of all its parts.

What is needed to repair the 2006 Pick Up engine?

The main thing will be to identify the origin of the fault and carry out a complete analysis of the general condition of the engine to Know which elements are in good condition and which will need to be repaired or replaced.

This first inspection will require adequate facilities and tools, as well as taking into account the safety guidelines that we will discuss a little later.

Initial inspection of the 2006 Pick Up engine

When carrying out the previous inspection, those elements replaced during periodic vehicle maintenance, such as filters, will have to be taken into account.

Furthermore, depending on the type of repair to be carried out, it will also be important not to forget other parts that are prone to greater wear, such as the hoses and connections, seals, gaskets, covers, bearings, rings or sleeves.

It is important to verify them since it is likely that they will have to be changed again during the repair of the 2006 Pick Up engine to ensure that operation is as optimal as possible.

Basic mechanics tools

To repair the engine it will be necessary have adequate facilities where the disassembly of the parts can be carried out, but we will also have to have certain tools.

Thus, in addition to having basic tools such as wrenches, hammers, or pliers, we will also need measuring tools and universal tools.

Basic Mechanical Tools — Basic Mechanics Tools

In addition, Specific tools will be required that will be used for both disassembly and repair of the engine..

Not having the necessary tools to repair a gasoline engine can be a problem since the probability of damaging components and performing poor work increases.

Guides and workshop manuals for Pick Up 2006

It is highly recommended have the vehicle workshop manuals, as they contain valuable information for the mechanic such as connection and wiring diagrams and information regarding the location of components.

This data will save time and many headaches, in addition to being very useful for verifying the parameters of adjustment of parts and the procedures recommended by the manufacturer to carry out the disassembly or assembly of any of the elements.

Here later you can Download the Manuals for Pick Up 2006

Safety Measures to Repair 2006 Pick Up Engine

Repairing an engine, regardless of whether it is gasoline or diesel, implies that you have to take a series of precautions and safety measures, which many of us probably consider basic but which does not hurt to remember to avoid unnecessary risks.

Recommendations for Composing the 2006 Pick Up Engine

There are no cables, tools or loose parts inside the engine compartment.
Disconnect the electric system Pickup 2006 before starting to work with it.
Verify that machinery, supplies and tools are placed correctly.
Keep the work area clean, tidy and ventilated.
Use, when appropriate, the specific equipment to handle and move heavy components. In this way, unwanted injuries will be avoided.
Secure the engine mounting points when working on a test bench.
Check fluid levels before starting the engine after repair.
Avoid working with jewelry or accessories that could get caught.
Use appropriate clothing, footwear and accessories such as gloves or protective glasses.
Have a fire extinguisher on hand and be aware of the existence of flammable materials found within the work area, keeping any combustible elements or solvents away from heat.

Brake Change Pick Up 2006

Yes Have you started to notice that the braking distance of your Pick Up increases? Do the wheels squeak or make any strange noises when braking? Well, most likely your rear or front brake pads are worn out and it is time to change them.

This change is not a simple operation, but if you follow the instructions in this manual step by step In less than an hour you will know how to change car brake pads. In addition, you will save between 1000 and 2000 extra pesos that you would have to pay to make the change in a Chevrolet workshop or agency.

Why do you have to change the brake pads on the 2006 Pick Up?

Brake pads are responsible for creating friction with the brake disc and slowing down the rotation of that disc to stop the car. Are essential elements to have adequate braking and as they wear out, said braking gets worse little by little.

Tools needed to change brakes

Gato: to raise the car and be able to remove the wheel.
Cross key: to loosen the wheel bolts.
Allen wrench: to remove screws that cannot be removed with the cross key.
Screwdriver: to pry and separate the brake pads from the brake discs.

With this Manual 2006 Chevrolet Pickup Repair and Service you will learn to carry out this process in a simple and fast way like a professional.
For More Details and Information Download the 2006 Chevrolet Pick Up Repair and Service Manual at the end of the Publication.

2006 Pick Up Electrical System

If any electrical system of your Pick Up stops working such as: lights, horn, radio, etc. The cause may be a blown fuse. You should be prepared in case this happens.

The fuses They are little ones security devices that protect the electrical elements of the car such as: windows, lights, radio, windshield wipers, rearview mirrors (if they are electric) and act as life insurance for them, in case an excessive current intensity occurs that could damage the electrical system, the fuse breaks to prevent this, cutting off the electric current flow.

The fuses They are classified according to the amperes they can withstand, which indicates the number engraved on them. In turn, the amp is the unit of measurement of intensity of the electric current. The more powerful the element to be protected, the greater the intensity that supports your fuse. But be careful, it is not enough to just change it - later we will explain how to do it - because the breakage of a fuse usually hides a major breakdown.

Know which fuse protects the 2006 Pick Up

La fuse box Each car is different. We only use the following image to exemplify the content of a car's fuses, not necessarily the Chevrolet Pick Up 2006.

-10 Amps. The smaller fuses protect the airbag, alarm or parking sensor.
10 amps. They are used for systems such as lights, audio equipment or central locking.
15 Amp. They are used for windshield wipers, brake lights or the fuel pump.
20 Amp. In the car, they protect the seat heating, the sunroof if it has one, or the cigarette lighter.
+20 Amps. The windows, the starter motor or the air conditioning use 30A and 40A fuses.

How to change a fuse in a 2006 Pick Up

The fuse box is usually under the steering wheel of the Pick Up, hidden behind the threshold that separates the dashboard and the driver's door or in a high place, under the hood, check it in the car owner manuals for the Pick Up.

1.- Discover them. Remove the plastic cover that hides the fuses. It is usually fitted under pressure.

2.- Depending on the system that fails you will have to change one fuse or another. The owner's manual for the Pick Upte will tell you which one it is.

3.- Remove it. Pull the fuse using the special tweezers which you will find on the plastic cover from step 1.

4.- Replace it. Insert the new fuse into the hole of the old one and replace the plastic cover.

What happens if a fuse breaks or blows?

In principle, it is possible that it does and that it will allow you to temporarily solve the problem, for example, if the windshield wiper breaks and it is raining. However, Fuses don't blow for no reason. They usually break due to a spike of electrical intensity, so it is most likely that their breakage was caused by some problem in the electrical system on which said fuse acts. If so, the fuse will break again at any time. It can be at the same moment that you activate the electrical system on which it acts or any day, right off the bat. However, if a fuse breaks, you should take the car to an auto electrical shop or dealership to check if there is any abnormality in the electrical circuit.

Can changing the fuse cause even greater damage?

No; At most, the fuse will blow again and that system will be unusable until it is repaired.

How do I know if the failure you are warning me about is serious or not?

It will probably be a serious fault, a short circuit if the fuse has blown and, as soon as you change it, it blows again.

Will the system on which the fuse acts work if it blows?

No; For example, if the fuse that activates the airbag blows, you will be left without it... and without all the systems that that same fuse controls. If you change the fuse, it will work again... but if it breaks again, you will be left without that device again.

When should I go to the workshop?

Always, even if you have changed the fuse and it has not blown again; It is important to check the circuit and discover the origin of the failure.

What if I put a fuse with a higher amperage than it should carry?

You are likely to cause a serious breakdown of the entire system that protects that fuse. For example, if it is the starter motor, you will burn it.

How much do they cost?

They are usually sold in boxes of eight or ten units. Each one costs about €0,90, and they have fuses of all amperages. They normally apply to any car.

Where to buy them?

In spare parts stores, in automobile centers, in large stores or in official workshops.

Why so many colors?

They have a mere identifying function: the orange ones are 5A; the red ones, 10A; the blue ones, 15A; the yellow ones, 20A; the white ones, 25, the green ones, 30…

Recommendations

Having spare fuses in the 2006 Pick Up is even more important than carrying spare bulbs or spotlights. because the breakage of any of them can mean the end of your trip. Think about what would happen if, for example, the low beam lights went out in the middle of the night. They can't fine you for not wearing them., but yes for driving without lights. Regardless of this, all brands recommend it and that is why they usually include at least one of each type in the box of replacement bulbs.

The older and more basic the model, the fewer fuses your electrical system will need. The reason is simple: being less equipped, there are fewer devices to protect. So, for example, a Chevrolet Pick Up 2006 will use between 15 and 18 fuses. On the other hand, a model with more complete equipment such as air conditioning, airbags, electric windows, ABS, ESP will require between 25 and 30 fuses.
For More Details and Information Download the 2006 Chevrolet Pick Up Repair and Service Manual at the end of the Publication.

Change or Replacement of Timing Belt or Chain Pick Up 2006

La timing belt break is the cause of one of the “expensive breakdowns” most common problems that car owners must face. Like steering wheel breakdowns, sometimes it happens unpredictably, but in many other cases it could have been avoided. With this 2006 Pick Up Manual you can minimize that risk.

Change or Replacement of Pick Up Timing Band or Belt 2006

Every how many kilometers should the timing belt of a 2006 Pick Up be changed?

El 2006 Chevrolet Pick Up Manual It will recommend a maximum mileage that you should travel before changing the belt (which will range between approximately 60.000 and 160.000 km).

If we move frequently in urban environments we should shorten this mileage by 20%, since the belt is “working” even if the car does not travel kilometers (for example in traffic jams, traffic lights, pedestrian crossings, etc.

A clear example: if the manufacturer says that the belt must be changed every 120.000 km, it is not the same to drive them in 6th gear at 2.000 RPM on the highway at 120 km/h than to drive them in the city over thousands of starts-stops without shift from 4th gear on short trips.

Every how many years should the distribution belt be changed?

Diagram for Changing the Band or Timing Chain of a 2006 Pick Up

If you consult the 2006 Chevrolet Pick Up Manual It will recommend a maximum time to change the strap, every 5 years it would be advisable to change it or at least check it thoroughly and at the slightest sign of fatigue (cracks, obvious discoloration, notches, wear, etc.) change it.

Automatic transmission repair Pick Up 2006

Within the Workshop Manual for Pick Up 2006 You can also see how the Pick Up transmission is repaired, the procedures and steps to follow to achieve excellent repair are detailed. In a very simplified way, here we inform you of a brief guide on how to start your repair.

Check oil level and condition

It is essential that the transmission operates with a correct oil level and that the lubricant conditions are at acceptable levels.

Regarding the oil level of automatic transmissions, both having a low oil level and having more oil cause failures. For example, slipping of the gears, the transmission neutralizing, overheating and starting to leak oil, among other failures.

2006 Pick Up Transmission Visual Check

This step consists of a visual examination of the anti-vibration mounting brackets, connections and mechanical linkages. Also vacuum connections and hoses, hydraulic lines and connections, electrical connections and oil leaks on the outside.

Functional test

In this exam you must review the operation of the speeds and qualities of the changes. This way you can evaluate the acceleration pressure and the governor pressure. You should also evaluate the performance of the valve assembly and its application under normal driving conditions, both in upshifts, downshifts and forced shifts.

Crankcase oil check

Disassemble the lower lubricant tank to examine the extent to which contaminants are present. Residues of friction material and metallic particles that may show damage to the internal components of the unit.
For More Details and Information Download the 2006 Chevrolet Pick Up Repair and Service Manual at the end of the Publication.

2006 Pick Up Body Repair

El chassis It is, structurally, the most important element of the Pick Up, since the rest of the parts sit on it, including the wheels, the engine or the body. In short, it is the foundation and foundation of any car, and a failure in the chassis could spread to virtually any part connected to it. Therefore, it is always important to know how to recognize when a vehicle has chassis problems and be prepared to solve them.

Diagnose 2006 Pick Up Body Damage

When a vehicle arrives at the workshop with a fault in the chassis or with symptoms thereof, the first thing that must be carried out is a diagnosis, to identify the problem, know the extent of the fault and know which parts must be replaced, thus obtaining a global vision of the repair:

Is there any type of deformation or deviation? In what direction or directions?
Are adjacent visible or non-visible parts of the body or other parts of the vehicle damaged?
Is the body structure deformed?

Based on this diagnosis, the processes, tools and techniques necessary to carry out the repair.

Chassis or body material

On the one hand, to repair the chassis, the material of which it is composed must be taken into account. Most of them are made up of tubes and support pieces of steel, although there are also other materials, such as aluminum. In any case, we are going to focus on the steel ones since they tend to be the most common.

Within steel itself there are different types with properties that vary greatly from one another. Above all, you have to take into account mechanical characteristics such as elasticity or tensile strength. In general, steels are usually classified by families, according to the procedure carried out for their production.

Conventional steels: They are mild steel and their manufacturing process is cold rolling.
High elastic limit steels: They have resistances ranging from 300MPa to 400MPa. The manufacturing process can be varied (oven hardening, grain refinement, precipitation hardening, mixed glass tempering, etc.).
Higher elastic limit steels: with resistance from 500MPa to 800MPa. Manufacturing process through hard phases.
Supreme Yield Strength Steels: hot formed. Resistance greater than 800MPa.

Depending on the type of steel, its resistance and elastic properties, it may be forced more or less in the straightening processes.

Possible procedures

The chassis is one of the most delicate elements of the vehicle since it works as a structure and support for all the other parts. Therefore, the question of whether to repair or directly replace a chassis is of utmost importance.

In case there is a slight deformation, it is possible to carry out a cold straightening. In this way you could try to return the chassis to its original position. However, it must be taken into account that it is a risky process since the steel could be forced too much and cause breakage, especially in the case of high-strength steel. Besides, It is quite difficult for a chassis to be 100% perfect after cold forming, although a good professional can leave it almost like new.

Likewise, before proceeding, it is necessary to rule out that the vibrations or rocking come from any part outside the chassis, such as deformed rims or bearings in poor condition.

In the event that the chassis has serious deformations, breaks or cracks (in this case they will probably be detected after a simple visual inspection), it is best to be honest with the client and recommend the chassis change, since it will be practically impossible to return it to its original state.
For More Details and Information Download the 2006 Chevrolet Pick Up Repair and Service Manual at the end of the Publication.
Regardless of the repair you want to make to your Pickup 2006 In these manuals that you can download you will have access to 100% official information about Chevrolet since it is information that is used in care, service and maintenance centers.

DOWNLOAD 2006 CHEVROLET Pick Up WORKSHOP MANUALS

INSTRUCTIONS TO DOWNLOAD MANUALS Pick Up 2006

Download the 8 files, each one has a weight of 1GB except the last one which has less capacity. Save them all in the same folder, they are compressed files therefore you will need the program WinRAR that you can download from here.
When you have all the files you have to give it click on number 1, to extract information it will ask you for a password in which you will have to enter » www.manualesdetodo.net " without quotation marks.
Be patient when you are unzipping and installing, the information is very complete and detailed therefore it is justified because it is heavy.
Once the information has been unzipped, we recommend that you read the file called installation-instructions.doc so you can install all the 2006 Pick Up manuals on your computer equipment.

If you still have doubts or questions, you can write at the end of this post in the comments, we hope that these manuals will be useful to you and they will help you solve the problem with your Pickup 2006.

1.- Download Chevrolet Pick Up 2006 Workshop Manual

2.- Download Chevrolet Pick Up 2006 Workshop Manual

3.- Download Chevrolet Pick Up 2006 Workshop Manual

4.- Download Chevrolet Pick Up 2006 Workshop Manual

5.- Download Chevrolet Pick Up 2006 Workshop Manual

6.- Download Chevrolet Pick Up 2006 Workshop Manual